[Mgs] Goodridge SS brake hoses

[Glenn Schnittke]

I'm kind of puzzled by that one, too, Paul. I've had them on my car 
(daily driver for almost ten years) with no problem. I'm coming up on an 
overhaul and I'd like to know your definition of 'routine' and your sources.

As long as the threaded diameter on the Goodrich hoses fit the ID of the 
bulkhead tabs and there is enough flat area to fit a serrated lock 
washer there shouldn't be any problem. I've run into lots of cars that 
no longer have the locking plate and have not had any come back as long 
as TWO lock washers are used.

Glenn

> Subject: Re: [Mgs] Goodridge SS brake hoses
> Message-ID:<89F47DDFF25445849B7D6108430417E0 at paul>
> Content-Type: text/plain; format=flowed; charset="iso-8859-1";
> 	reply-type=original
>
> Then it's the wrong one.  SS braided hoses shouldn't be used anyway, unless
> you are going to replace them on a routine basis.
>
> ----- Original Message -----
>> I am trying to fit the front Goodridge SS brake hoses on my 1973 MGB.  The
>> front Goodridge hoses have a smaller fitting where the hose attaches to