[Mgs] Brake bleeding question

Wed Aug 31 11:58:46 MDT 2011

How do you tell which one you have?

TIA,

CR

On 8/28/2011 8:44 AM, Paul Hunt wrote:
> There's two types of brake balance switch.  I think the one on the 
> non-servo master is left screwed in but you have to bleed the first 
> circuit again very carefully until the light just goes out.  With the 
> servo master you unscrew the switch, bleed, then screw back.  The 
> difference is the first is a non-latching shuttle that is moved away 
> from each circuit as it's being bled, the latter is a spring loaded 
> shuttle that recentralises itself as long as the switch is unscrewed.
>
> ----- Original Message -----
>> ... Now Haynes says when bleeding with PDWA
>> start in the front closest to the master cylinder then work away 
> _______________________________________________
>
> Mgs at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/mgs/ccrobins@ktc.com