[Mgs] rocker threads causing problems now Torque wrenches

[Paul Hunt]

You can't tighten a fastener with one torque wrench then try it with another 
torque wrench for the reasons you say, but connecting two torque wrenches 
together with a bit of 1/2" or whatever box tubing should be a good enough 
indication.  Even in the first case you should be able to mark the position 
of nut and stud after the first, then back-off and retighten with another 
and compare the marks.  Which one is right is another matter ...

----- Original Message ----- 
> Lastly you can't check a torque wrench with another torque wrench.
> It takes more torque to get a fastener turning than it does to keep it
> turning.