[Mgs] Brake rotor issue

[Paul Hunt]

According to the parts lists the only different discs and hubs were between 
the 4-cylinder and V8 cars.  There's not much difference in the latter as 
the V8 hubs were used on 4-cylinder cars for the 77 and later model years, 
and the same disc seems to have been used with both hubs when on a 
4-cylinder.  If my old discs were in this garage I could measure them, but 
they're not so I can't.

PaulH.

----- Original Message ----- 
> He bought new brake rotors and he tells me the hole in the center for the
> hub is not large enough to go onto the hub.
> He says the hole in the rotor is 2.85" and the hub is 2.95"  Not quite 
> 1/8"
> inch too small.
> I always thought that B rotors were a case of buy one fits all.