[Mgs] Brake rotor issue

[Councill, David]

A quick check of a spare rotor (probably from my 71BGT) shows the hole
is 2.875" according to my micrometer. I have some spare used hubs but
they are buried deeper in one of my spare parts boxes. Still, the hub
looks suspicious in this case as the rotor sounds correct.

David Councill
67 BGT
64 B
72 B

-----Original Message-----
From: mgs-bounces at autox.team.net [mailto:mgs-bounces at autox.team.net] On
Behalf Of Paul Osborne
Sent: Wednesday, November 17, 2010 6:43 AM
To: Richard Ewald
Cc: MG List
Subject: Re: [Mgs] Brake rotor issue

Rick,  something is not right and will bet it is with the hub. there is
no choice of rotors for different years of MGBs. none that I can see.

paul
On Nov 17, 2010, at 7:09 AM, Richard Ewald wrote:

> Again my buddy is having an issue putting his 67 B back together.
> He bought new brake rotors and he tells me the hole in the center for
> the hub is not large enough to go onto the hub.
> He says the hole in the rotor is 2.85" and the hub is 2.95"  Not quite

> 1/8"
> inch too small.
> I always thought that B rotors were a case of buy one fits all.  I
> haven't gone and looked at it myself, but I have to admit from his
> description, I am stumped.
> Anybody got any ideas?
> Rick
> _______________________________________________
>
> Mgs at autox.team.net
> Donate: http://www.team.net/donate.html Suggested annual donation
> $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
> http://autox.team.net/mailman/options/mgs/paul@ece.rochester.edu
>


Paul Osborne
Department of Electrical and Computer Eng
University of Rochester
201 Hopeman Build RC
Rochester NY 14627
585-275-5226
_______________________________________________

Mgs at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/mgs/dcouncill@msubillings.edu