[Mgs] Harness routing 67B

[Richard Ewald]

Thanks to David, Dan and Carl I have the needed pictures.
An extra special thanks to David who took some pictures this AM before work.
Rick

On Mon, Nov 8, 2010 at 8:34 AM, Councill, David
<dcouncill at msubillings.edu>wrote:

> Let us see if this helps. My 67BGT is still pretty much in original
> condition. I have had it for about ten years and the previous owner had
> it mostly parked for another decade or so because he couldn't get it to
> pass Colorado (US) emissions testing. I did restore the interior (seat
> covers, dash pad) due to sun/heat damage but the mechanicals have been
> mostly unrestored so I am confident that it still is representative of
> its era, particularly the wiring. (even has an original working BMC AM
> radio).
>
> Here are three pictures I took this morning right before I left for work
> (sorry the middle one is a bit blurred). I did replace the wiring
> harness on my 72B and it was pretty much self explanatory so maybe these
> pictures can give you a good idea of where to anchor it as you spread it
> out.
>
> http://www.karamursel.org/mg/67BGT_int1.JPG
> http://www.karamursel.org/mg/67BGT_int2.JPG
> http://www.karamursel.org/mg/67BGT_int3.JPG
>
> David Councill
> 67 BGT
> 72 B
> 64 B
>
> -----Original Message-----
> From: mgs-bounces at autox.team.net [mailto:mgs-bounces at autox.team.net] On
> Behalf Of Richard Ewald
> Sent: Sunday, November 07, 2010 1:59 PM
> To: MG List
> Subject: [Mgs] Harness routing 67B
>
> Does anyone have pictures or diagrams of the electrical harness routing
> in a
> 67 B roadster?
> I'm helping a buddy with a full resto and it has been too many years
> since I
> have done this.
> Rick