[Mgs] Heater Core Removal Q - MGB

[Barrie Robinson]

I found that I could not get a satisfactory adjustment that way - it 
works but not 100%


At 03:47 AM 3/29/2010, Paul Hunt wrote:
>Don't you attach the cable to the unit before fitting the unit to 
>the car then do the adjustment at the control end?
>
>----- Original Message -----
>>...   One thing however, has not been mentioned and
>>that is adjusting the flap cables !   You have to do this through
>>that tiny hole while "inside" the cockpit.  You have to slacken off
>>the nut, pull the flap to fully closed and then tighten.
>

Regards

Barrie
barrie at look.ca
(705) 721-9060