[Mgs] Overdrive does not work when it is hot.

Andrew B. Lundgren lundgren at byu.net
Mon Aug 30 21:36:53 MDT 2010


  Normal engine 20w-50 to start with.  Then I read some comments on 
using ND.  I tried that, didn't make a bit of difference.  So I went 
back to normal.  Again with no difference.

By hot I should say after I have been driving on a 80-100 deg day for 
about 30 minutes.  You can feel the heat on the metal plate that the 
gear shifter comes though.  It won't burn you, but you could make a cup 
of noodles on it.  :)

--
Andrew

On 8/30/2010 8:35 PM, Max Heim wrote:
> Well, what are you running for oil?
>
> I have to admit I don't see why it should get hot in the first place.
>
>
> --
>
> Max Heim
> '66 MGB GHN3L76149
> If you're near Mountain View, CA,
> it's the primer red one with chrome wires
>
>
>
> on 8/30/10 6:57 PM, Andrew B. Lundgren at lundgren at byu.net wrote:
>
>>    When my OD gets hot it won't engage, it will actually disengage once
>> it gets too hot.
>>
>> I had the entire OD and transmission gone though before I installed it
>> at a local MG specialist that was probably 5 years ago.  Since then I
>> have put less then a few thousand miles on the car.
>>
>> I don't want to buy a new solenoid if that can't be the problem...  I
>> have changed the oil in it a few times hoping that might be it.
>>
>> Thanks!
>>
>> --
>> Andrew
> _______________________________________________
>
> Mgs at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/mgs/lundgren@byu.net


More information about the Mgs mailing list