[Mgs] MG Hubs Needed-- Help

[Councill, David]

What type of axle - banjo or Salisbury? And what type of hub - wire
wheel or disc? I have some parts for the banjo axle in the bottom of
this picture:
http://www.karamursel.org/mg/PB080002A.jpg
A bit rusty but useable left from the dpo who was converting my 64B from
disc to wire wheel and had already completed the front. Since I was able
to find some original disc wheels, I converted the front back to disc
hubs. I might have parts for the Salisbury axle that my son disassembled
for his high school automotive class several years ago, disc wheels. It
was a spare axle (72 B) that I got back in pieces. But it went to some
good.

You could specify what you are looking for by using the Moss diagrams,
her is the later tube type:
http://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=29021
And the banjo:
http://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=29021

David Councill
64 B
67 BGT
72 B

-----Original Message-----
From: mgs-bounces at autox.team.net [mailto:mgs-bounces at autox.team.net] On
Behalf Of Paul Osborne
Sent: Friday, August 20, 2010 6:13 AM
To: mgs at autox.team.net
Subject: [Mgs] MG Hubs Needed-- Help

HI, I am looking for a set of MGB rear tube axle hubs,  or an old
axle in any condition.  needed for project car.
Any one out there with parts?

thank you


--
Paul Osborne
University of Rochester
Engineering & Technical Services
Department of Electrical and Computer Engineering
201 Hopeman Bldg River Campus
Rochester, New York 14627
585-275-5226
paul at ece.rochester.edu