[Mgs] Moss Spin-on oil filter adaptor

Richard Ewald richard.ewald at gmail.com
Sun Apr 11 09:02:25 MDT 2010


V8 ford filter fits. Ph8 Fram

Sent from my iPhone

On Apr 11, 2010, at 7:32, "Councill, David"  
<dcouncill at msubillings.edu> wrote:

> I am installing the spin-on oil filter adaptor on my 64B project  
> car. It
> started when I couldn't get the 20+ year old o-ring seal out of the
> block groove plus knowing I'd have to line up the canister and old
> adaptor with the block on reassembly and aligned so that the assembly
> doesn't leak oil. It seemed like time to try the spin-on adaptor and
> thus be done with the messy canister filter changes. I finally had to
> take a drill to split the 0-ring seal so I could get a small  
> screwdriver
> blade under the rubber and finally get the seal out - all now  
> petrified
> rubber.
>
> I'll be putting in the spin-on adaptor today but it looks like a nice
> kit so I'll probably convert my 67BGT over as well on its next oil
> change. I ordered the kit but not the filter as it looks like Moss has
> the filter marked up maybe $2-$3 more than local cost. They identify  
> the
> filter as 235-880 or the WIX filter as 235-830. Today's question -  
> what
> does that translate to in terms of a WIX, Napa, or Fram filter  
> number? I
> usually get my filters at NAPA where their gold filters are just
> rebranded WIX filters.
>
> David Councill
> 64 B
> 67 BGT
> 72 B
> _______________________________________________
>
> Mgs at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/mgs/richard.ewald@gmail.com


More information about the Mgs mailing list