[Mgs] [MG-MGB] Delta Cam Lash

[James F Juhas]

All the MGA and MGB shop manuals I have say to adjust them hot, and only 
give one spec.  John Twist (University Motors) and Barney Gaylord (MGA 
Guru) say the same thing in person and in print.  And the plate that 
mounts on my MGA engine says specifically to adjust when hot.

Larry Daniels wrote:
> Thanks, Paul.  That's what I was thinking, too, but it seems to me that I 
> saw specs on a cam recently where they wanted it adjusted warm.  I just 
> don't remember where I might have seen that.
>
> Larry
>
>
>
> ----- Original Message ----- 
> From: "Paul Hunt" <paul.hunt1 at blueyonder.co.uk>
> To: <MG-MGB at yahoogroups.com>; "MG List" <mgs at autox.team.net>
> Sent: Monday, May 25, 2009 10:03 AM
> Subject: Re: [Mgs] [MG-MGB] Delta Cam Lash
>
>
> As standard clearance is .014 to .016 cold, and the majority of clearance
> change will be down to expansion of the push-rods, I'd be doing the same 
> short
> of any other documented value.
>
> PaulH.

[demime 1.01d removed an attachment of type text/x-vcard which had a name of james_f_juhas.vcf]