[Mgs] Generator woes continue

[Barney Gaylord]

At 03:54 PM 5/16/2009 -0700, Simon Matthews wrote:
>....
>Next question: how to R&R the front bearing?
>....

Grind the flange off the rivets and punch them out.  R&R bearing, 
replace plate, and install new rivets or use machine screws and 
nuts.  Suggest a drop of Loctite on the threads.  Cut screws flush with nuts.

Barney Gaylord
1958 MGA with an attitude
http://MGAguru.com