[Mgs] MGB windscreen

[Paul Root]

Chunky or creamy?


VB :-)

On May 7, 2009, at 1:14 PM, Elliott and Martha DeGraff wrote:

> Try lots of PB and then use a drill with a left hand twist.  The  
> combination of torque, friction heat and vibration usually backs  
> most screws out.
>
> Ed Woods wrote:
>> List,
>> I am still struggling with what started out to be a "simple"  
>> windscreen glass replacement that has turned into a struggle to  
>> remove the screws which retain the four corner brackets. Very few  
>> came out in the standard "left loose" manner. The remainder had to  
>> have their heads drilled out.
>> Any ideas about how to remove the remains of these screws? How much  
>> heat will they take before the aluminum of the frame is damaged?
>> Thanks,
>> Ed Woods _______________________________________________
>> Support Team.Net  http://www.team.net/donate.html
>> You are subscribed as degraff at erols.com
>> Mgs at autox.team.net
>> http://autox.team.net/mailman/listinfo/mgs
>> http://www.team.net/archive
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
>
> You are subscribed as ptrmgb at gmail.com
>
>
> Mgs at autox.team.net
> http://autox.team.net/mailman/listinfo/mgs
>
> http://www.team.net/archive