[Mgs] MGB Windscreen

[Paul Hunt]

If you have the metal dash you can remove the bolts without removing or
loosening the dashboard as a whole, just undo the bolt and screws that hold
the glovebox fibreboard and push that back for access that side, and on RHD
cars removing the fuel gauge and overdrive switch allows you to get at the
bolts that side with the socket handle sticking through the fuel gauge space.
Don't know about padded dash or LHD, if you have to pull the dash forward
there are a set of bolts along the top and above the steering wheel, access
only from behind.

PaulH.
  ----- Original Message -----
  Also, can the 4 bolts which attach the assembly to the body be installed w/o
  removing the dash? If not how best to move the dash far enough to reach
  these 4 bolts?