[Mgs] SU-HIF Problem

[Paul Root]

The key word is HIF. You have to take it off to look at the float.

Still, it's not that big of a deal.

On Jul 16, 2009, at 5:26 PM, Steven Trovato wrote:

> I agree with Max.  Before you take it all apart, at least take a  
> look and make sure it is not a sunken float.  That's what happened  
> to mine.  It is a super easy fix, if you have another float to swap  
> in.  That may not be the problem, but if it is, you'll be back in  
> business and save the major carb work for when it is snowing.  And  
> if you live somewhere where the weather is perfect all year round,  
> then I just hate you.  :-)
>
> -Steve Trovato
> strovato at optonline.net
>
> At 02:00 PM 7/16/2009, mgs-request at autox.team.net wrote:
>> Hey Steve, IMHO you will need to remove the carb(s) from the  
>> manifold, take off the bottom plate, (4 screws), and just replace  
>> the float, valve assy., (use vitron tipped), and, in my case, the  
>> shaft that holds the float.? I did both carbs as they are the same  
>> vintage.? It is a simple procedure once the parts are on hand.? Oh  
>> yeah, buy new bottom gaskets too.? Regards, Tom
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
>
> You are subscribed as ptrmgb at gmail.com
>
>
> Mgs at autox.team.net
> http://autox.team.net/mailman/listinfo/mgs
>
> http://www.team.net/archive