[Mgs] 78 MGB Brake fluid change

Bob Howard mgbob at juno.com
Mon Jan 12 10:00:43 MST 2009


   Some flush with alcohol before filling with new fluid, and some run a
lot of extra new fluid through the system to rinse out the old fluid. 
   First time I made the change, I did not rinse with alcohol, but were I
to do it again, I would.
Bob
 
On Sat, 10 Jan 2009 09:38:51 -0600 "Steve Gorr" <sgorr2 at comcast.net>
writes:
> I will be replacing the brake hoses with braided steel/Teflon units 
> sometime
> this winter and Santa left a large bottle of silicon fluid. So I was 
> wondering
> if I should flush the lines with something before introducing the 
> silicon
> stuff. The existing brake fluid hasn't been flushed under my 
> ownership other
> than bleeding and topping off after rear wheel cylinders were 
> changed 2 years
> ago.
____________________________________________________________
Click for free info on marketing degrees and make up to $150K/ year
http://thirdpartyoffers.juno.com/TGL2141/fc/PnY6rw1UR1UflECkOyqMnAypZ56FcfyH6cZtbXKDLe0NEmjeYKpTX/


More information about the Mgs mailing list