[Mgs] MGA frame width at rear

[Eric J Russell]

Barney, attached are some photos I snapped of a spare frame with a tape 
measure for reference. Let me know if this is not what you need. Also let me 
know if you need higher resolution copies.

Eric Russell
Mebane, NC
http://home.mebtel.net/~ejrussell
----- Original Message ----- 

> Date: Sun, 06 Dec 2009 00:36:42 -0600
> From: Barney Gaylord <barneymg at mgaguru.com>
> Subject: [Mgs] MGA frame width at rear

> For those people who may have an MGA chassis or frame with body off,
> can you measure the inside and outside width of the frame where the
> rear bumper brackets attach?  I would like measurements from two or
> three different frames to verify consistency (or amount of possible
> variation).  I need this for a wheel chair lift I'm working on that
> will attach to the frame similar to a trailer hitch bracket.
>
> Barney Gaylord
> 1958 MGA with an attitude
> http://MGAguru.com

[demime 1.01d removed an attachment of type image/jpeg which had a name of frame 01.jpg]

[demime 1.01d removed an attachment of type image/jpeg which had a name of frame 02.jpg]

[demime 1.01d removed an attachment of type image/jpeg which had a name of frame 03.jpg]

[demime 1.01d removed an attachment of type image/jpeg which had a name of frame 04.jpg]