[Mgs] Starter solenoid main connecting point

[Sales at " Just Brits "]

<< But you should check to see if the thread is still good near the end 
of the
stud -- usually it only strips where the nut sits. If so, you could 
justpile on 2
or 3 thick washers, to move the nut out to the good part of the thread.  >>

That's exactly what I've had to do a couple times in the past,
Max !!  And I 'trimmed' them down to just a tad bigger then
the nut.

Ed
Please visit MY site at:
www.justbrits.com