[Mgs] Generator front bearing.

Bob Howard mgbob at juno.com
Tue Apr 21 12:22:24 MDT 2009


   Did the armature turn smoothly and silently in the front bearing? 
   Is the rear bushing round and a good fit on the new armature? Oiled?
   Belt adjusted just barely tight enough to grip the pulley?
Bob

On Tue, 21 Apr 2009 10:57:29 -0700 Simon Matthews
<simon.d.matthews at gmail.com> writes:
> I just attempted to drive to work in my MGA but had to return home.
> 
> Some months ago, I purchased a new armature for the generator in my
> MGA. I recently got around to replacing the armature. I drifted the
> old armature out of the front plate and put the front plate onto 
> the
> new armature. But it seems that something is wrong with the front
> bearing because after a mile or two, I could hear a new  noise from
> the engine compartment and on returning home, the generator was 
> very
> hot.
> 
> Any thoughts on what I might have done wrong?
> 
> Simon
____________________________________________________________
Wood or aluminum framed enclosed bulletin boards up to 45% off.
http://thirdpartyoffers.juno.com/TGL2141/fc/jZBdzA5TgKMxxX7LepKDCZiMh8z0Cq414zUn3aFwb5fEQ7Cpl8mhr0k/


More information about the Mgs mailing list