[Mgs] "High rev'ing" MGA carb

[WSpohn4 at aol.com]

You may have a throttle plate that isn't centred or has a loose screw and  
has become uncentred, jamming the throttle slightly open.  Or the throttle  
shafts may be passing too much air.  Either way, the carb probably has to  come 
off to inspect it (unless you wiggle the shaft and it is clearly too loose  - in 
which case the carb has to come off anyway).
 
Bill
 
In a message dated 13/05/2008 6:35:04 A.M. Pacific Daylight Time,  
guinness at stclegal.com writes:

Can I  fix the carb without removing it (man is space tight 
around there   --  but I hate dealing with the carb stud nuts, vacuum 
tube, spring  holder, etc.)?