[Mgs] MGA front hub bearing removal

[Rick Brown]

Mike

I believe this will help you with removing the bearings:

http://mgaguru.com/mgtech/universal/ut108.htm

Always go to Barney Gaylord's site when you have an MGA question - the 
answer is usually there. mgaguru.com

Rick
Webmaster for:
___________________________________________________________
  http://www.mgcars.org.uk/namgbr  - The North American MGB Register
  http://www.mgcars.org.uk/mgcouncil -  North American Council of MG 
Registers
  http://www.britishcarclub.net - The Suncoast Classic MG Club and Nature 
Coast English Car Club
----- Original Message ----- 
From: "Mike Duvall" <duvallcom at sbcglobal.net>
To: <british-cars at autox.team.net>; "mgs mgs" <mgs at autox.team.net>
Sent: Friday, July 25, 2008 19:06
Subject: [Mgs] MGA front hub bearing removal


> How do I remove the bearings from the front hubs on an MGA?  I assume
> each bearing pulls out the sleeve in the center prevents using some
> kind of puller.  The only method I can think of is to get a punch on
> the inner edge and try to tap it out.
>
> Any better suggestions?