[Mgs] Intake Manifold

[Andrew B. Lundgren]

Mine as a rubber hose clamped on with a bolt clamped into the end of the
hose.

On Tue, 2008-07-22 at 10:38 -0400, Ed Woods wrote:

> List,
> 
> I have removed the air pump and gulp valve from my MG's 18V (1972) engine.
> There is a large, 90 degree fitting in the intake manifold that needs to be
> blocked. I don't want to simply cut it off and fill the hole. I'd like to be
> able to put all the emission stuff back on the engine with as little hassle as
> possible if the day ever comes to do so.
> 
> So what do I use to block this opening? Any thoughts?
> 
> Thanks,
> 
> Ed Woods
> ________________________________________