[Mgs] A Bad Day with the MGB engine

[The Roxter]

Ed Woods wrote:
> Gentlemen and Ladies,
>
> Well, almost two years to the day after pulling the 18V engine for rebuilding,
> I cranked it on the starter today, plugs removed, to prime the oil system.
> After approximately 2 minutes of operation, still no oil at the flex line to
> the pressure gauge or at the oil filter base.
>
> Yes, it has sufficient oil.
>
> I recall a list discussion of different oil pump gaskets. Is that where I need
> to look at this point or are there other possiblilities not involving dropping
> the pan?
>   
Is the pressure relief valve installed correctly?

> -The Roxter
> --