[Mgs] Judson Supercharger

[WSpohn4 at aol.com]

Yes, it will bolt onto an MGB - with suitable parts - it has been a long  
time since I did exactly this on a 3 main MGB engine and for instance, I think  
you might need to use the MGA front crank pulley, thinner than the MGB, plus 
you  need a drip feed oiler he is missing (part of the valve cover) and the 
various  brackets and pulley spacers.
 
I doubt they eat up any more power than the Moss does.
 
The results are modest as is the boost level (5.5 psi).  They give you  
pretty much what you'd get with a somewhat (conventionally) tuned engine.   It 
frankly isn't worth the fuss except as a rather neat period accessory for  people 
to ooh and ahh at in shows.
 
See _http://mgaguru.com/mgtech/power/pp1.htm_ 
(http://mgaguru.com/mgtech/power/pp1.htm) 
 
Bill
(been there, done that, ho hum)
 
 
In a message dated 1/9/2008 2:50:57 P.M. Pacific Standard Time,  
ptrmgb at gmail.com writes:

There's  a Judson on ebay, auction no. 250201946628

It's for an 'A, but would it  go on an 1800?

I know these are near as efficient as the modern Moss  supercharger,  
but what do people think it would do for a  'B?