[Mgs] Overdrive swap

[Dodd, Kelvin]

John:

It's a piece of cake.

Drive shaft, mounts are all the same.
The speedo calibration may be an issue depending on which trans you get.
Any OD from 1968-80 will bolt in though.




Kelvin Dodd




> -----Original Message-----
> From: mgs-bounces+doddk=mossmotors.com at autox.team.net
> [mailto:mgs-bounces+doddk=mossmotors.com at autox.team.net] On
> Behalf Of johnhed at comcast.net
> Sent: Wednesday, January 09, 2008 9:58 AM
> To: mgs at autox.team.net
> Subject: [Mgs] Overdrive swap
>
> If I get my hands on an overdrive transmission to swap into
> my 80B, how easy is that?  Other than having ot get the
> wiring harness and new shifter, does it just swap in or are
> there different mounts, drive shaft, etc?
>
> John Hed
> 80 B-LE (non-OD!)
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
>
> You are subscribed as doddk at mossmotors.com
>
>
> Mgs at autox.team.net
> http://autox.team.net/mailman/listinfo/mgs
>
> http://www.team.net/archive