[Mgs] seat removal question

[Larry Daniels]

The manual is correct.  The rear two bolts are a bit difficult to  reach, 
but
there are only four.  Careful when you lift the seat out as the  tracks may
just fall off, as well as the spacers, and the aluminum washers in  the 
spacers
that the bolts go through.

Regards,

Robert B. Houston

================================

Is there any reason the spacers need to be made out of wood?  Could an 
appropriately sized AL bar stock work just as well?

It seems foolish to keep on replacing rotted wood spacers.



Larry Daniels

79 MGB LE
60 Bugeye
67 Austin A60 Pickup (Ute)

"You only need two tools: WD-40 and Duct Tape. If it
doesn't move and should, use the WD-40. If it
shouldn't move and does, use the duct tape."