[Mgs] HS-4 carbs

[Max Heim]

If by a gasket you mean a tiny fiber washer, yes. Although if you have the
non-adjustable replacement plastic floats, you might have to eliminate the
washer, or stack up two of them, to achieve the correct float height.


--

Max Heim
'66 MGB GHN3L76149
If you're near Mountain View, CA,
it's the primer red one with chrome wires


on 8/29/08 5:36 PM, Bernd at 1971mgb at cox.net wrote:

> On the HS-4 carbs is there a gasket that goes on top of the Needle and Seat?,
> on top of the threaded part of the Seat,  it's located in the fload bowl. Moss
> does not show one, on part number 373-626, item 33.  I've heard that unless
> there is a gasket in that location, gasoline can seep through. Confused as
> usual.
> 71 MGB