[Mgs] Brakes won't bleed

Richard Ewald richard.ewald at gmail.com
Mon Aug 25 12:48:00 MDT 2008


For what is it worth I have had many cases where there is a blockage right
at the bleeder screw at a caliper/wheel cylinder.  Before you go 7 kinds of
crazy, you might want to unscrew the bleeder off of the caliper and use a
needle or ice pick make sure the hole is free and clear into the wheel
cylinder.
Also did you bench bleed the master before installing it?  If you did not
this could be a large part of the problem.

>
>
>
> Mgs at autox.team.net
> http://autox.team.net/mailman/listinfo/mgs
>
> http://www.team.net/archive


More information about the Mgs mailing list