[Mgs] Spark Plugs?

[Max Heim]

I am using NGK BP6ES.

Firing order is 1-3-4-2.



on 8/1/08 2:51 PM, Dan DiBiase at d_dibiase at yahoo.com wrote:

> Going out to Autozone tomorrow am to get the final items needed to start the
> car up, which I hope to do this week-end.
> All I have left to do is tighten the driver's side engine mount (which means
> removing the steering rack again), put the exhaust
> manifold and carb back on, replace the exhaust system, put the radiator back
> in, reconnect all of the underbonnet hoses
> and wires, do the alternator, fan belt, fan, plugs, radiator hoses, etc. Oh,
> and recharge the battery and replace all of the fluids.
> And bleed the brakes. ;-)
> 
> What plugs are people using these days?
> 
> Can anyone give me an idea of the order of the wires on the distributor? Two
> of the plug wires are not attached to the plugs
> that are in the engine now, but are connected to the distributor.
> 
> TIA
> 
>  Dan D
> Central NJ USA
> '76 MGB Tourer - Engine Reinstalled...
> '65 MGB Tourer Project - Yep, Still Is....
> NAMGBR #5-2328 
> http://dans65b.blogspot.com/ (Currently down for a spam check!)
> http://dans76b.blogspot.com/
> http://dansautoblog.blogspot.com/
> http://mywebpages.comcast.net/dibiase/Working_MG_Gallery.html

--

Max Heim
'66 MGB GHN3L76149
If you're near Mountain View, CA,
it's the primer red one with chrome wires