[Mgs] dimensions of the K&N tapered conical air filter for SU converted cars

[Derek Vandivere]

Hang on a sec - I'll go measure 'em. Cylindrical one is about 5.5 deep, 
15 across; conical is about 6.5 (centimeters). That's counting the nuts 
(which explains the extra cm).

Derek

Paul Root wrote:
> Thanks, Kelvin!
>
> If they are 2 1/2 tall, I should be good.
>
> On Apr 24, 2008, at 11:55 AM, Dodd, Kelvin wrote:
>
>   
>> Paul:
>>
>> It is approx. 2 1/2" tall.
>>
>>
>> APT, http://www.aptfast.com/ was manufacturing the 1/2" snub stacks,  
>> you
>> might give them a call and see if they still have them.
>>
>>
>> Kelvin.
>>
>>
>>
>>     
>>> -----Original Message-----
>>> From: mgs-bounces+doddk=mossmotors.com at autox.team.net
>>> [mailto:mgs-bounces+doddk=mossmotors.com at autox.team.net] On
>>> Behalf Of Paul Root
>>> Sent: Thursday, April 24, 2008 9:48 AM
>>> To: MGs List
>>> Subject: [Mgs] dimensions of the K&N tapered conical air
>>> filter for SU converted cars
>>>
>>> Does anyone have the height of the K&N filter. I have some 1
>>> 1/2 ram pipes that I'd like to put into the car, but the foam
>>> filters I'm using aren't tall enough.
>>>
>>> I was looking for those 1/2 inch ram pipes, but they seem to
>>> have disappeared.
>>>
>>> Currently I have the stock air filter insert, but with hex
>>> bolts, and I don't want to counter sink them and find some
>>> allen head bolts to make them flush.
>>>
>>>
>>> Paul.
>>> _______________________________________________
>>>       
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
>
> You are subscribed as derek at vandivere.net
>
>
> Mgs at autox.team.net
> http://autox.team.net/mailman/listinfo/mgs
>
> http://www.team.net/archive