[Mgs] just one last thing to remove before the car goes to paint....

[Dodd, Kelvin]

Aaron:

There are two screws holding the clips. The obvious one has the big cup
washer. There is another one with just a flat washer. Easy to miss.



Kelvin Dodd



> -----Original Message-----
> From: mgs-bounces+doddk=mossmotors.com at autox.team.net
> [mailto:mgs-bounces+doddk=mossmotors.com at autox.team.net] On
> Behalf Of Aaron Whiteman
> Sent: Tuesday, April 22, 2008 9:17 PM
> To: MG Mailing List
> Subject: [Mgs] just one last thing to remove before the car
> goes to paint....
>
> Help!
>
> I can't figure out how to get the hood (people, not engine)
> clips off the body.  I'm speaking of the pair of slotted
> chrome metal pieces on the deck between the trunk and the
> passenger compartment.
>
> I removed the screw and spacer from the underside, so I
> *think* I've got everything released, but they aren't budging.
>
> --
> Aaron Whiteman -- http://www.panix.com/~awhitema/
>   '75 MGB (red for now), HIF4 carbs
>   '06 Subaru Impreza Outback Sport