[Mgs] spongy brakes

[Paul Hunt]

With two MGBs I find I have to bleed in two stages - normal filling/bleeding 
with a continuous flow device such as the Gunson's EeziBleed, then I have to 
get someone to press hard on the brake pedal while I briefly open and close 
each caliper nipple in turn, and this always blasts a bit more air out. 
Until I do that the brakes are spongy, and a long initial pedal, even though 
I can get no more air out with the EeziBleed.

PaulH.

----- Original Message ----- 
> ... I will bleed the brakes and see what type of results I'll get.