[Mgs] Rev gear Replacment

[Chad Cooper]

The overdrive unit really doesn't affect anything, it slides off as a whole
unit.   Replacing reverse will require disassembly of the transmission.  So
while you are in there I would plan on replacing the synchros and any
bushings or bearings that look bad.  The tranny is kind of a puzzle and it
can only be assembled in order.  Just take your time and pay attention to
the instructions in the Bentley manual and you will be ok.

Chad

'72B

-----Original Message-----
From: mgs-bounces+mgb72=airmail.net at autox.team.net
[mailto:mgs-bounces+mgb72=airmail.net at autox.team.net] On Behalf Of Paul
Osborne
Sent: Wednesday, October 17, 2007 7:16 AM
To: mgs at autox.team.net
Subject: [Mgs] Rev gear Replacment

How difficult is it to replace the rev gear in a B overdrive transmission?
-- 
Paul Osborne
University of Rochester
Engineering & Technical Services
Department of Electrical and Computer Engineering
201 Hopeman Bldg River Campus
Rochester, New York 14627
585-275-5226
paul at ece.rochester.edu