[Mgs] Oil Pressure line early Healey (almost midget content)

[Paul Hunt]

That would be unusual, it would depend on what is there are already.  If 
there is an oil pressure switch then there is a special tee that screws in 
to the block in place of the switch, the switch screws into the end of the 
tee, and the pipe from the gauge then screws onto the side of the tee. 
Alternatively if the gauge is replacing the switch a male-to-male adapter 
screws into the block and the gauge pipe on to that.  These all have tapered 
BSP fittings.

PaulH.

----- Original Message ----- 
>I have a buddy restoring an Austin-Healey Sprite.  He's trying to figure
> outhow to connect up the oil pressure gauge.  Any advice??  I see moss
> says you have to soldier the line in.