[Mgs] Center Cap Dimensions Needed

[Paul Hunt]

My factory V8 centre caps are 2.68" from the top of the rim to the back of 
the flange, and about 2.745" diameter.  I say 'about' as it seems to vary 
from just over 2.74" to just under 2.75" around the circumference.  They are 
only 'tin' and so will distort slightly according to how the hole in the 
wheel has been machined.  I couldn't get an accurate figure on the hole as 
the back end of the caliper fouled the rim.

PaulH.

----- Original Message ----- 
> Does anyone have a set they could caliper for me?