[Mgs] Rebuilding Jaeger Oil/Temp Dual Gauge

[Barrie Robinson]

Frank,

Jaeger are made by Smith and you will often get Jaeger gauges 
labelled as Smith but never visa vera !!!


At 02:44 PM 7/27/2007, frank wrote:
>Robert: I have an MGA and a 1964 and both have Jaeger gauges. Under the face
>they are identical to the Smiths gauges. I save and buy broken Jaeger gauges
>at swap meets, Carlisle, etc. just to acquire the face.Then I use the Jaeger
>face on  functioning Smiths gauge. What gauge do you need? I may have a
>non-working Jaeger gauge with a good face.
>Frank Krajewski
>
>----- Original Message -----
>From: "Robert J. Guinness" <guinness at stclegal.com>
>To: "MG List" <mgs at autox.team.net>
>Sent: Friday, July 27, 2007 12:37 PM
>Subject: [Mgs] Rebuilding Jaeger Oil/Temp Dual Gauge
>
>
> >I need to rebuild a Jaeger Oil/Water Dual Gauge for my MGA.  I have
> > reviewed Barney Gaylord's web page on fixing the temperature capillary.
> > However, I can't find any info on cosmetic restoration to the dial face
> > or hands, or how to get to the inside guts. Does anyone sell the dial
> > faces for these (or any) MGA gauges?  I am a visual person, so it you
> > know of any resources out there that I can use to educate me on how to
> > proceed, I would appreciate it.  Thanks.
> > --
> > Robert Guinness
> > _______________________________________________
>_______________________________________________
>barrie at look.ca
>
>Edit your replies
>
>Mgs at autox.team.net
>http://autox.team.net/mailman/listinfo/mgs

Regards
Barrie

Barrie Robinson
(705) 721-9060
http://www.britishv8.org/MG/BarrieRobinson.htm