[Mgs] Anti-sway bay

[Dodd, Kelvin]

No tension.


Wrench away.

Kelvin Dodd

> -----Original Message-----
> From: owner-mgb-v8 at Autox.Team.Net [mailto:owner-mgb-v8 at Autox.Team.Net]
On
> Behalf Of Barrie Robinson
> Sent: Monday, July 23, 2007 1:56 PM
> To: mgb-v8 at autox.team.net; mgs at autox.team.net
> Subject: Anti-sway bay
>
> I am trying to replace my current rad with an aluminium one.  All is
> undone and free BUT I cannot get the rad out (and presumably the new
> one in) because the bottom outlet fouls the front anti-sway
> bar.  Obviously cutting the bottom outlet off is not a good idea and
> doing same to new rad would be absolutely stupid.  What I want to
> know is can I undo the two brackets holding the anti-sway bar and
> swing it away - or does this not go so easily.    Is the sway bar
> under some sort of tension/compression?  Time is short as the date
> for the British V8 show is looming up !!!
>
> Regards
> Barrie
>
> Barrie Robinson
> (705) 721-9060
> http://www.britishv8.org/MG/BarrieRobinson.htm
>
> ///
> ///  mgb-v8 at autox.team.net mailing list
> ///  Send admin requests to majordomo at autox.team.net
> ///  Send list postings to mgb-v8 at autox.team.net
> ///  Edit your replies!  If they include this trailer, they will NOT
be
> sent.
> ///