[Mgs] banjo bolt torque?

[Barney Gaylord]

At 09:57 AM 7/9/2007 -0400, Marc wrote:
>Is there a specified torque for brake hose banjo bolt to caliper on 
>a Mk III Midget? I can't find one anywhere. If not, is there a good guide line?

Tight enough not to leak, but not so tight as to break the banjo 
bolt.  If it does not seal properly with only moderate torque you 
would need to replace the soft copper seal washers.

Barney Gaylord
1958 MGA with an attitude
http://MGAguru.com