[Mgs] Advice wanted on MGB Brake Master Cylinder

[Bob Howard]

  The washer-looking thing is a spacer made of a hard white plastic,
Delrin, I believe.  Its fit is snug in the bore and I don't believe you
can get it to come out by banging it on a board; I could not do it.  I
drilled it and screwed in a self tap screw, which I could then hook and
pull on to remove the spacer.
   These MCs are difficult to work on, and I have not been able to get
them to not leak. Unless you fancy the challenge of it all, you might
want to buy a new one and be done with the hassle. 
Bob
 
On Wed, 22 Aug 2007 15:51:17 -0500 The Roxter <rocknatural at gmail.com>
writes:
> My Victor uses an MGB Brake Master Cylinder, the kind with the big 
> cylindrical reservoir that leans forward, with the big round cap.