[Mgb-v8] Radiator hose suggestions

[Barrie Robinson]

Jim,

I have sort of the same set up but I never have the problem.   Maybe 
your metal tube does not have a lip??  If it has a lip there is 
highly unlikely that those metal clamps will let go !




09:28 AM 6/20/2012 -0400, Jim Ray wrote:
>Does anyone have a suggestion on what lower radiator house to use on my 1980
>MGB V8? I am using the stock MGB radiator and stock water pump on the Rover
>3.5 engine. The lower outlet is on the driver's side and the water pump
>inlet is on the passinger's side. What I have today is a combination of two
>hoses with a metal sleeve inserted in the middle which all to often
>seperates from the hoses, leaving me stranded. Your help and suggestions are
>greately appreciated.
>
>
>
>Jim Ray
>
>Hartwell, GA
>_______________________________________________
>
>Mgb-v8 at autox.team.net
>Donate: http://www.team.net/donate.html
>Suggested annual donation  $11.47
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage: 
>http://autox.team.net/mailman/options/mgb-v8/barrie@look.ca

Regards

Barrie
barrie at look.ca
705-721-9060