[Mgb-v8] Need Automotive electrical refernce guide

David Schmidt davidgschmidt at yahoo.com
Mon Jun 29 09:07:40 MDT 2009


I am transplanting to a 1973 MGB.

The alternator I have on the new engine can be setup as 2 wire or 1 wire.






________________________________
From: Paul Hunt <paul.hunt1 at blueyonder.co.uk>
To: David Schmidt <davidgschmidt at yahoo.com>; mgb-v8 at autox.team.net
Sent: Monday, June 29, 2009 9:37:10 AM
Subject: Re: [Mgb-v8] Need Automotive electrical refernce guide

 
It depends on what electrics the new engine will 
have, and what year you are transplanting it in to.  As far as the latter 
it could be as simple as two wires to the alternator and one to the 
coil.  Earlier MGBs had dynamos, remote sensing alternators, and multi-wire 
alternators. Later models had electric temp gauge, manifold heater, ballasted 
ignition and electronic ignition all of which involve extra wires from the body 
to the engine. 
 
PaulH.
----- Original Message ----- I am in need  of a general purpose automotive electrical guide / wiring guide.  Any  suggestions?  

I am transplanting a 3.4l v6 into my MGB and just  need to make sure I am "doing it all correctly" as far as 
electrical.


More information about the Mgb-v8 mailing list