<div dir="auto">Hello Friends,<div dir="auto"><br></div><div dir="auto">Another small bit of progress, rebuilding my TD's interior. Some of the wood bits are going back in. Others still are yet to be located. (I took this car apart about four years ago!)</div><div dir="auto"><br></div><div dir="auto">I have also begun adding padding for under the upholstery, in the rear at least. Here's an early-work-in-progress picture.</div><div dir="auto"><br></div><div dir="auto"><a href="http://aubard.us/MGTD/20170410_153543.jpg">http://aubard.us/MGTD/20170410_153543.jpg</a><br></div><div dir="auto"><br></div><div dir="auto">I have previously glued vinyl upholstery material down without padding and have never been pleased buy how much of the underlying surface irregularities show through. This padding is about 1/8" (3mm) thick and is the solution to that problen. Its foam between two tough plastic cloth layers and conforms to most curved surfaces. In the picture, you can see where I had to add a splice when the surface curvature was too great. Glues down with contact cement just fine. The stuff was about $10/yard at Jo-Ann Fabrics.</div><div dir="auto"><br></div><div dir="auto">I have trial fitted the wheel well upholstery from the Moss interior kit and it conforms beautifully over the padding.</div><div dir="auto"><br></div><div dir="auto">I now need to apply the padding to the other wheel-well and the side curtain compartment door, and I'll be ready to add the Honey Tan upholstery! More pictures to follow.<br></div><div dir="auto"><br></div><div dir="auto">-rick</div></div>