[Mg-t] TC Question

[Wbeech@flash.net]

Or on line at: https://www.mcmaster.com/standard-hex-head-screws

Bill

Sent from my DynaTAC 8000X

On May 20, 2019, at 11:38 AM, Gable, Gerry <GABLEG at ecu.edu> wrote:

My car has been worked on before and now I am looking for a specific bolt to use in place.  It was tapped out to receive a M10 1.25 X 55 bolt which is not a standard according to Fastenal in my town.  Can anyone offer where else I could find one.
Thanks
Gerry



______________________________________________

Mg-t at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/mg-t/wbeech@flash.net

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/mg-t/attachments/20190520/5012ff2b/attachment.html>