[Mg-t] Graph of MG XPEG dyno results

[laf48 at aol.com]

Another Very satisfied customer of my Abingdon Performance normally aspirated performance cam for street use.







Hello Len,



Huffaker Engineering had my engine on their dyno yesterday and got 90 HP at 5200 RPM and 91.3 at 5500 RPM. The torque was 80 pound feet at 2500 RPM and 96.8 at 3700 RPM, it stayed in the mid 90s all the way to 5000 RPM and the started tapering off.The engine crew at Huffaker’s were very impressed since the engine is running stock intake and exhaust manifolds. It does have a Laystall aluminum head.


Thank you for a great camshaft package, I will be calling you when we are ready to build a new engine for the race car. Both cars have the TF 1500 engine but the race car has an old Derington manifold set up which helps it breath a little better.


Bill 


 













-----Original Message-----
From: laf48 <laf48 at aol.com>
To: mgs4dave <mgs4dave at tampabay.rr.com>; nwmgtr <nwmgtr at sinclair.net>; barcc <barcc at syd.auracom.com>; grunau.garage <grunau.garage at sympatico.ca>; tandxroth <tandxroth at worldnet.att.net>; MG50Ytype <MG50Ytype at aol.com>; lst1167 <lst1167 at theinter.com>; mgnut <mgnut at mindspring.com>; MIKEFRAN <MIKEFRAN at aol.com>; azmgclub <azmgclub at ten4ten.com>; billh <billh at rangelinemews.com>; j2george <j2george at pacbell.net>; pthelander <pthelander at earthlink.net>; sugarloaf <sugarloaf at efortress.com>; chuckh55 <chuckh55 at cbiwireless.com>; kedtexas2 <kedtexas2 at msn.com>; Kimberclose <Kimberclose at aol.com>; Roselover5 <Roselover5 at aol.com>; TOPAZTD <TOPAZTD at aol.com>; lkmend <lkmend at msn.com>; klorander <klorander at bellsouth.net>; meltonroger <meltonroger at sbcglobal.net>; tokarj <tokarj at erols.com>; murphy <murphy at eclipse.net>; roycrane <roycrane at att.net>; kelsey <kelsey at shadetreemotors.com>; bruceobbink <bruceobbink at comcast.net>; gordclark <gordclark at serurenet.net>; t_m_moreland <t_m_moreland at msn.com>; mg-t <mg-t at autox.team.net>; mg-tabc <mg-tabc at yahoogroups.com>
Sent: Fri, Apr 29, 2016 8:25 am
Subject: MG XPEG dyno results



Another Very satisfied customer of my Abingdon Performance normally aspirated performance cam for street use.









XPEG 1500 cc .040" overbore, normally aspirated, Laystall head, street roller cam.
See attachment
Len
















































Bill 


 








-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/mg-t/attachments/20160504/70364390/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: angeloni graph2.jpg
Type: image/jpeg
Size: 2924283 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/mg-t/attachments/20160504/70364390/attachment-0001.jpg>