[Mg-t] TD running board treads

[lawrie]

Simple - Cut the ends to a neat taper to fit into the aluminum, then carefully round off the dome to a sloping contour on a belt sander.

Lawrie


>  -------Original Message-------
>  From: Richard Lindsay <richardolindsay at gmail.com>
>  To: mg-t at autox.team.net
>  Subject: [Mg-t] TD running board treads
>  Sent: 08 Oct '15 05:42
>  
>  Hi Gang,
>  
>  The Moss-supplied rubber inserts for my TD's running board treads are
>  not cut to fit. Rather, they are just strips of rubber. That means
>  they don't fit the tapered ends of the metal strips. I have found that
>  cutting the ends to fit results in pretty ugly results.
>  
>  What have you done to install these treads handsomely?
>  
>  -rick
>  -------------------------
>  ______________________________________________
>  
>  Mg-t at autox.team.net
>  Donate: http://www.team.net/donate.html
>  Suggested annual donation $11.47
>  Archive: http://www.team.net/archive
>  Forums: http://www.team.net/forums
>  Unsubscribe/Manage:
>  http://autox.team.net/mailman/options/mg-t/lawrie@britcars.com
>  
>