[Mg-t] Crank Pulley

[Jonathan Hermance]

Hi Gerry,I would not go to the trouble of replacing the front crankshaft oil seal(s) unless you were losing an excessive amount of oil from your existing front crank shaft seal, or you know your seal was damaged by wear from a crack that extended to the center of the pulley you are replacing.  If you do decide to replace the original style upper and lower front seals, do consider installing a better modern From the Frame Up style GA 125 Oil Seal, or a MOSS 120-750 seal.JonSLC, UT    TC,TD,TF
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/mg-t/attachments/20151001/799bf15c/attachment.html>
-------------- next part --------------
An embedded message was scrubbed...
From: "Gable, Gerry" <GABLEG at ecu.edu>
Subject: [Mg-t] Crank Pulley
Date: Thu, 1 Oct 2015 15:14:13 +0000
Size: 8816
URL: <http://autox.team.net/pipermail/mg-t/attachments/20151001/799bf15c/attachment.mht>