[Mg-t] Engine stand + XPAG

[Ron Olds]

Rick,

Used a conventional engine stand for my engine with no difficulties.  I did
need to make four pieces out of bar stock because I couldn't get the engine
stands mounting to come in close enough to bolt up to the engine.  I bolted
the brackets to the engine and then to the engine stand.

Ronald Olds
Sales Manager
Plasser American Corporation
PO Box 5464
2001 Myers Road
Chesapeake, VA 23324-0464
 
Phone  (757) 543-3526
Cell      (630) 240-0818
Fax      (757) 494-7186 
 
The information contained in this e-mail including any attachments may be
proprietary, privileged or confidential and is intended solely for the use of
the addressee. Any unauthorized distribution, disclosure or any other such use
is strictly prohibited. Furthermore, any reviews, dissemination or copying by
anyone other than the intended recipient is expressly prohibited. If you have
received this e-mail in error, please notify the sender and destroy all copies
of the original transmittal.


-----Original Message-----
From: mg-t-bounces at autox.team.net [mailto:mg-t-bounces at autox.team.net] On
Behalf Of Rick Lindsay
Sent: Sunday, July 14, 2013 12:32 PM
To: mg-t at autox.team.net
Subject: [Mg-t] Engine stand + XPAG

Hi Friends,

What is the preferred method of mounting an XPAG on an engine stand?

-rick
Sent from my Samsung Galaxy SIII - the rectangle with rounded corners, just
like a BlackBerry.
______________________________________________

Mg-t at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/mg-t/rolds@plausa.com