[Mg-t] Mg-t Digest, Vol 7, Issue 46

[Duvall Video Productions]

Rust is a difficult---  even if it looks good you should acid etch with
something like Eastwood's Fast Etch,  (then filler if needed and after sanding
acid etch metal again),  then epoxy primer then high build primer.....


On Apr 29, 2013, at 1:00 PM, mg-t-request at autox.team.net wrote:

>  have sanded the upper half of the panel, mostly to see how easily
> the rust is removed.  The bad news is that its hard to remove.  The
> good news is that it DOES come off leaving a nice surface for paint.
> One could do the whole tub is one long, painful day.