[Mg-t] [mg-tabc] MG T series push rods

[Clive Sherriff]

Oppps!

For "regular silver" read "regular solder"

Clive
=================================
----- Original Message ----- 
From: "Clive Sherriff" <clive.sherriff at ntlworld.com>
To: <mg-tabc at yahoogroups.com>; "John Seim" <kingseim at earthlink.net>; "Chip 
Hellie" <chiphelli at yahoo.com>
Cc: "MG" <Mg-t at autox.team.net>
Sent: Saturday, May 30, 2009 8:57 AM
Subject: Re: [Mg-t] [mg-tabc] MG T series push rods


> Silver solder would be the best solution probably -
> a lot stronger than regular silver.  Although a hotter
> process, it's not hot enough to alter the push rod's
> metaluric structure which Brazing or Welding would
> do.
>
> Clive
> Oxford UK
==================================