[Mg-t] front hood screws/bolts

[Bob Howard]

  The parts book does not detail this either.
  My car has flat-head machine screws through the bracket that have
washers & nuts underneath, between metal and the rubber strip. 
Needle-nose pliers or tweezers are handy to hold the nuts in place to get
the machine screws started.
Bob



 
On Thu, 14 May 2009 11:33:17 -0500 "oliver" <sumton at sbcglobal.net>
writes:
> i took the hood off because one of the chrome pieces was broken.
> 
> there are nice big screws at the back of the hood, but little tiny 
> screw 
> headed bolts at the front, that don't seem to catch.  were there 
> nuts and 
> they are now gone or do i need bigger bolts or what?  i've looked at 
> the 
> moss catalong and i can't see a detail there.
> 
> thanks. 
____________________________________________________________
Compete with the big boys.  Click here to find products to benefit your business.
http://thirdpartyoffers.juno.com/TGL2141/fc/BLSrjpTI97vkTtqZnv8l9wT15JLt0A6YmQr3Qn39TCHKTK6IFhncKAbMVos/